In the past few years, the use of shading colors has become customary. Using these colors, and with the help of a solid colored sprayer, a beautiful shadow can be created for each color depending on the manufacturer’s taste.
This shining liquid is recommended to manufacturers who have high volume production and do not have enough time to use other products. By using this shining liquid, the surface of the leather is covered with a layer of liquid which makes it shiny.
This cream wax on the shoe fills the leather pores by penetrating the middle layers as well as giving it a special softness. The shoe should certainly be polished with a soft brush 15 minutes after the leather has become glossy and shiny.
When the leather is cut its inner layer is revealed. This doesn’t work well with the final look of the product. Therefore, it is recommended to color the edge. This color is provided in three types of lining or filler, half-puff, and full-puff. The lining edge color is a one-layer filler on the edge of the work; in half-puff, in addition to the edge coat, the sideline is also a little leveled to be semicircle. In full-puff edge coloring this leveling is completely evident.
Some of the special shoe models require compressing onto the mold. You can use this lubricant in the mold to make the operation easier and cleanse the mold.
This product is used for ease of inserting or removing the mold from inside the final shoe product.
Some leathers used for the upper are not soft enough and thus, cause some problems for the shoemakers when they want to secure it on the mold. The liquid can be sprayed or sponged to the back of the leather to soften it, making it more flexible to fit the mold.
ometimes the color of your leather is not desirable while it is not possible to return it. Or maybe the shoe color is not desirable for the customers and you can’t sell that particular model to someone else either. The 5005 Color Changer helps you change the color of your product and sell it.
If you have used a chisel to measure and cut the leather, you can erase the tracks of the chisel without worry.
Usually, the final patent leather products are opaque and patchy because of all the touching during production. By applying this polish, your patent leather bag, shoe, and belt will be perfectly shiny and glossy.